What is the new corrosivity test approved by the IMO for solid bulk ca...

What is the new corrosivity test approved by the IMO for solid bulk cargoes?

Published: 13 July 2022

BIMCO provides the full write-up on the final guidance issued by t he International Maritime Organization (IMO) relating to corrosivity test for use in the International Maritime Solid Bulk Cargoes (IMSBC) Code . This test is used for classify ing solid bulk cargoes that are hazardous when transported in bulk (MHB cargoes) .

Amendment 06-21 to the IMSBC Code was adopted by the Maritime Safety Committee of the IMO at its 105th meeting held in April 2022. One of the amendments concerned the testing of cargoes for any corrosive hazards in order to see if the cargo is a MHB cargo where an additional test has been incorporated. In connection with this, the IMO also issued final guidance regarding this refined MHB test.

See full write-up in Cargo/Solid bulk cargo/IMSBC Code circulars/Testing of Solid Bulk Cargoes for Corrosivity – IMO Issues Final guidance

What best describes your reason for contacting BIMCO?

This helps us direct your call to the correct department.

Please select a reason for contacting BIMCO from the list above to find the best contact number